Electric Fireplace Wall Hanging Ideas
Contrary to traditional wood or gas fireplaces Wall-mount electric fireplaces are ready to be installed right out of the box. These electric fireplaces are an excellent way to add ambience to your home without the need for remodeling or venting.
They are usually heavy and require careful installation. Follow these steps to set up your new electric fire correctly.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed fire instantly transforms any room. This is a great option for those who don't have a fireplace or reside in apartments.
Decide where you want to place your electric fireplace. It is best to choose a location that isn't susceptible to moisture, and at least just a few feet from furniture and drapes. Mark the wall with layout marks to indicate the top and bottom plates of the fireplace frame.
Use a tool such as a drill to drill exploratory holes in the wall, examining for studs with a detector and marking the drywall the locations of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for your fireplace installation.
Depending on the wall-mounted fire, you may either need to fit the firebox and screen as one unit or separate them by an adjustable wall bracket. If you're not sure about your ability to handle this aspect of the project on your own, think about hiring an experienced general contractor or carpenter.
You can find an installation template that comes with all electric fireplaces. However it is recommended to keep a spirit level handy and pencil to mark the exact location where the wall brackets will be erected. Use the template to ensure that the power cable of the fireplace can reach a nearby outlet to connect it.
Install the drywall as clean and flush as you can to give the fireplace a neat appearance. Add a piece of trim to the bottom edge, and then sand and paint the entire frame to give it a finished look.
You'll need to insert the hooks or slots on the back of most electric fireplaces mounted on walls into the brackets for mounting. Make sure the slots or hooks are aligned before you connect the fire to wall brackets. Once the fire is installed, you can add additional elements like driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space that is above a fireplace, mantel or chimney breast is prime real estate to hang artwork. There is a delicate balance between an artistic arrangement and one that doesn't detract from the overall design of the fireplace.
A common rule of thumb is that a picture should not exceed 80% of the size of the fireplace or mantel it is placed over. This will help it remain proportionate and appear pleasing on the wall. This guideline could be influenced by other ornaments and decorative items on the mantel.
If you're planning to put a picture above your electric fireplace, it's crucial that the frame is made from glass or other material that is resistant to high temperatures. If you're not sure whether the frame is suitable, a quick test using a cloth that is heat-sensitive will reveal whether the frame is suitable for this type of installation.
One of the most common concerns when displaying pictures over the fireplace is the possibility of damage to the artwork from smoke or stray heat. Although this is rarely an issue with a traditional gas or wood-powered fireplace, it's a good idea to check the recommendations of the manufacturer if you're planning to use an electric fire that is wall-mounted.
Most electrical fires have a mounting bracket that can be attached to the wall with either hanging screws or wall-mounted fixing systems. If the latter is the case, it is recommended to drill exploratory holes in a distinct area of the wall prior to when you begin to install your electric fire. You can then utilize a pipe and cable finder to ensure that there aren't any cables or pipes near the position of mounting.
If you do, you can place your fire on the electrical socket or move it to a new place. If you choose to move it to a new spot it is important to ensure that the power cable will be able to connect from the fire to the electrical outlet - this is particularly important for older homes or homes with solid walls. In the event that it doesn't the electric fire won't be able to work properly. Some models come with a template that will show you where to drill the holes for this purpose Some require a spirit-level and pencil to mark the correct spots on your wall.
3. Connect the Power Cord
You may need to move your plug socket in front of the fireplace if you've installed a fireplace with a recess. This can help create a sleeker finish. Be sure to test the fireplace prior to doing this to make sure that everything functions exactly as it should.
The third way to mount an electrical fireplace is by framing the room and then building it into the wall. This gives you a classic elegant look and also allows the installation of an optional mantel. The owner's guide for your model will provide specifics on framing, wiring and securing the fire.
If you're ready for mounting your new electric fireplace on the wall begin by marking the installation location with a pencil or marker. Use a carpenter’s level to ensure that the installation area is level and flat. You can also use a stud finder to mark the location of studs so that you are sure that you're drilling into a safe area.
After you've marked your location for installation then use your electric drill to create holes for the bracket screws or hanging screws. Make sure you adhere to the exact directions in the owner's guideline for this procedure, especially when you're installing the fireplace within a wall. If you are unsure how to proceed you can consult an expert for assistance.
You can also hide power cords from view by using an organizer kit for cables. These kits usually come with clips, sleeves, or boxes for bundling cables. You can also make use of fish tape or wire snake tools to help guide the cords through the wall. If you do not want to cut the drywall, a Powerbridge kit can provide a more secure and safer connection.
You can also camouflage cords with paintable wire covers, or by tacking them to the wall. Be sure to keep the cover or tacks away from the source of heat however. This will protect the cord from damage and prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fireplace is an excellent option for home renovations or for those who don't have the space or funds to install gas fireplaces. They are easy to install and can be used straight out of the box and can be a great alternative for those looking for a chic modern accent or the warmth that fireplaces provide. super fast reply are designed to be hung as artwork on any wall. They they can be recessed or not recessed at all and are fully electric with heating that is powered by a fan.
Before you begin the actual installation process it is a good idea to make a list of all the tools and equipment you'll need. You can find the complete instructions on how to mount an electric fire in the user's manual. Some models might require you to attach the brackets directly to the wall. Other models may have a mounting plate that can slide into slots or hooks attached to the brackets used for mounting. Best electric fireplace wall mount is important to remove any combustible materials from the area where you are installing a recessive unit. In general you should keep these materials at a minimum of 3 feet from the front of the fireplace.
After you've checked all parts, you should plug in your electric fireplace and ensure that it is working correctly. This is an important step because it will guarantee that the flame effect screen and heater work in the way you intended. This will also provide you with an idea of how the product will appear in its final position.
If you're confident that your electric fire is working properly, you'll want to think about covering the power cord. This will keep the final product neat and neat. navigate to this site is possible to do this by applying paintable wire covers, or you can choose to install a new outlet that will allow you to tuck the cord behind the unit. This will provide seamless finishing to your fireplace.